DeWalt DW9118 Bedienerhandbuch PDF herunterladen (Seite 17)

3. Reinstall the ball (CC), the spring (DD), and then the disc (EE).

4. After all grease is cleaned from the area, reinstall the check valve

plug (BB).

Cleaning Contamination from the Filter (Fig. 2, 12)

Should the grease gun fail to dispense

FIG. 12

grease, clean the ﬁ lter (V).

NOTE: If there is still grease in the tube,

open the purge valve prior to pulling the

tube handle.

1. Pull the grease tube handle (L) out

as far as it will go, then secure

the grease tube rod (M) into the

retaining slot (O) by moving the rod

to the side. Ensure the rod is placed

securely in the slot to prevent it from

disengaging.

2. Unscrew the grease tube assembly (N) from the grease gun and

remove.

3. Using a small ﬂ at-blade screwdriver or pick, carefully pop out the

ﬁ lter.

4. Wipe off the ﬁ lter using a soft cloth. If the ﬁ lter still has debris in it

after wiping, a soft brush or swab may be used.

5. Once clean, reinsert the ﬁ lter into the round groove, ensuring it is

fully seated, and reattach the grease tube assembly to the grease

gun.

Accessories

WARNING: Since accessories, other than those offered by DEWALT,

have not been tested with this product, use of such accessories with

this tool could be hazardous. To reduce the risk of injury, only D

EWALT

recommended accessories should be used with this product.

WARNING: Extreme pressure may cause nozzle extension or

ﬂ exible hose to burst. Use only D

EWALT approved hoses and follow

ﬂ exible hose instructions and warnings.

Recommended accessories for use with your tool are available at

extra cost from your local dealer or authorized service center. If you

need assistance in locating any accessory, please contact D

EWALT

Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call

1-800-4-DEWALT (1-800-433-9258) or visit our website: www.dewalt.

com.

ACCESSORIES

DCGG5701 1/8" NPT Grease Gun Coupler

DCGG5701-3 1/8" NPT Grease Gun Coupler 3-pak

DCGG5702 Right Angle Grease Gun Coupler

DCGG5703-42 1/8" NPT Grease Gun Hose Assembly (42") (107 mm)

DCGG5703-24 1/8" NPT Grease Gun Hose Assembly (24") (61 mm)

DCGG5704 Clear Grease Gun Cartridge Tube

Repairs

The charger and battery pack are not serviceable.

To assure product SAFETY and RELIABILITY, repairs, maintenance

and adjustment (including brush inspection and replacement) should

be performed by a D

EWALT factory service center, a DEWALT

authorized service center or other qualiﬁ ed service personnel. Always

use identical replacement parts.

Thank you for your purchase. Register your product now for:

• WARRANTY SERVICE: Registering your product will help you

obtain more efﬁ cient warranty service in case there is a problem

with your product.

English

1 2 ... 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

DeWalt DW9118 Bedienerhandbuch Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge DeWalt DW9118