DeWalt DC987 Wartungshandbuch PDF herunterladen (Seite 13)

Have defective cords replaced immediately.

Charge only between 4 °C and 40 °C.

Discard the battery pack with due care for

the environment.

Do not incinerate the battery pack

NiMH, NiCd+ and Li-Ion.

Charges NiMH and NiCd

battery packs.

Charges Li-Ion battery packs.

See technical data for charging time.

Package Contents

The package contains:

1 Cordless midhandle driver/(percussion) drill

1 Charger

1 Battery pack (K and A1, B1, L1 models)

2 Battery packs (KA, KB, KL and K2 models)

1 Side handle (DC987KL/DC988KL)

1 Kitbox

1 Instruction manual

1 Exploded drawing

NOTE: Battery packs and chargers are not included

with N-models.

• Check for damage to the tool, parts or accessories

which may have occurred during transport.

• Take the time to thoroughly read and understand

this manual prior to operation.

Description (fig. A, G)

WARNING: Never modify the power tool

or any part of it. Damage or personal

injury could result.

1 Variable speed switch

2 Forward/reverse slider

3 Keyless chuck/auto spindle lock

4 Mode selector/torque adjustment collar

5 Collar settings

6 Three-gear selector

7 Bit holder

ENGLISH

8 Grip

9 Side handle (DC987, DC988)

10 Battery pack

11 Release buttons

12 Charger

13 Charging indicator (red)

INTENDED USE

Your cordless driver/(percussion) drill has been

designed for professional drilling and screwdriving

applications.

DO NOT use under humid conditions or in presence

of flammable liquids or gases.

These drills are professional power tools. DO NOT let

children come into contact with the tool. Supervision is

required when inexperienced operators use this tool.

Electrical Safety

The electric motor has been designed for one voltage

only. Always check that the battery pack voltage

corresponds to the voltage on the rating plate.

Also make sure that the voltage of your charger

corresponds to that of your mains.

Your DEWALT charger is double insulated

in accordance with EN 60335; therefore no

earth wire is required.

If the supply cord is damaged, it must be replaced

by a specially prepared cord available through the

DEWALT service organization.

Mains Plug Replacement

(U.K. & Ireland Only)

If a new mains plug needs to be fitted:

• Safely dispose of the old plug.

• Connect the brown lead to the live terminal in the

plug.

• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made

to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Recommended fuse: 3 A.

Using an Extension Cable

An extension cord should not be used unless

absolutely necessary. Use an approved extension

cable suitable for the power input of your charger

(see technical data). The minimum conductor size

is 1 mm

; the maximum length is 30 m.

When using a cable reel, always unwind the cable

completely.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

DeWalt DC987 Wartungshandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Bohrmaschinen DeWalt DC987