DeWalt DC300-XE Bedienerhandbuch

DC300 36V Cordless Circular SawDC310 28V Cordless Circular SawDC300 Scie circulaire sans fil de 36 voltsDC310 Scie circulaire sans fil de 28 voltsDC30

English9Charger DiagnosticsThis charger is designed to detect certain problems that can arise with the battery packs or the charger. Problems are indi

English10CAUTION: Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return

English11To Install the Blade: 1. Place inner clamp washer (O) on saw spindle with the large flat surface facing out toward the blade (Fig. 4). 2. R

English12 2. Retract the lower blade guard (G) and place blade on saw spindle against the inner clamp washer, making sure that the

English13protect you under all circumstances. Your safety depends on following all warnings and precautions as well as proper operation

English14making any adjustments or removing/installing attachments or accessories.The full range of the bevel adjustment is from 0˚ to

English15DON’T support board or panel AWAY from the cut.FIG. 15SUPPORTDO support board or panel NEAR the cut.FIG. 14Workpiece SupportWARNING: It i

English16INSTALL RIP FENCE IN THIS DIRECTIONFIG. 16POCKET CUTTING (FIG. 17) WARNING: To reduce the risk of serious personal injury, turn tool

17Englisha year, you take or send the tool to a certified service center for a thorough cleaning, inspection, and lubrication of the gear case.Repairs

18EnglishPatent NotificationManufactured under one or more of the following U.S. patents:685901363297886175211613371360576086653815Other patents pendi

English1DC300, 36 Volt 4000 RPMDKACEBFGLJIMN A. SWITCH LOCK-OFF BUTTON B. TRIGGER SWITCH C. BATTERY PACK D. DEPTH ADJUSTMENT LEVER E. S

English2IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-4-DEWALT (1-800-433-9258) General Sa

English3hat, or hearing protection used for appropriate conditions will reduce personal injuries.c) Avoid accidental starting. Ensure the switch

English4e) Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water.

English5• When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapi

English6WARNING: Always use eye protection. All users and bystanders must wear eye protection that conforms to ANSI Z87.1.WARNING: Always wear proper

English7slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slot

English8• DO NOT splash or immerse in water or other liquids.• Do not store or use the tool and battery pack in locations where the temperature m