DeWalt D28715-XE Bedienerhandbuch

D28715-XE HEAVY-DUTY 355 mm (14") CHOP SAW WITH QUICK-CHANGE CLAMPINSTRUCTION MANUAL

10NOTE: A keyed blade clamp system which includes a blade bolt and blade bolt washer, (Fig. 7, O, P) is available at extra cost from your local dealer

11Y8 mm(.3")FIG. 10YVWXLubricationClosed-type, grease-sealed ball bearings are used throughout. These bearings have sufficient lubrication packed

Stanley Black & Decker82 Taryn Drive, Epping, VIC 3076 Australia • 1800 444 224 (Aust) or 0800 339 258 (NZ)www.dewalt.com.au • www.dewalt.co.nz(

3Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to

4• USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using and extension cord, be sure to use one heavy enough to

5• NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.• CHECK DAMAGED PARTS

6• DO NOT CUT ELECTRICALLY LIVE MATERIAL.• Do not use circular saw blades or any other toothed blades with this tool. Serious injury may result.•

7The D28715-XE chop saw is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced

8Spark Deflector Adjustment (Fig. 1)To best deflect sparks away from surrounding persons and materials, loosen the screw (B), adjust the spark deflect

9FIG. 6Removal and Installation of Wheels (Fig. 1, 7)The Quick-Change blade clamp requires no tools to change the blade. 1. Push in wheel lock lever